bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Open Range Light Fifth Wheel


  • Replacement Bearings, Grease Seal, And Brake Assemblies For A Lippert 4,400lb Trailer Axle
  • Hey Richard, Based on the axle tag you provided you'll need the following components: Inner Bearing # L68149 Outer Bearing # L44649 Grease Seal # 58846 (single) # RG06-050 (2pk) You'll also want to pick up some hi-temp grease # L11380 to pack your bearings and lube the spindle. To save some money you can purchase these all together with the # BK2-100 kit that you were already looking at. You'll need two kits per axle. If you have drum brakes then you'll need to replace your brake assemblies...
    view full answer...

  • Replacement Slide-Out Seals For 2013 Open Range Light 5th Wheel
  • To get right seal you'll need to remove a portion of the seal you currently have to get the side profile. There are multiple types of applications for slide-out seals; Glue On, Peel-N-Stick, Press In, Push On, and Slide-On. There are multiple styles and measurements; some come with a bulb, some don't. For example the Rubber Wiper Seal and Bulb for RV Slide Out # SR98FR you were looking at comes with the bulb and is a stick on design. If you can pull a couple of inches of the seal out to...
    view full answer...

  • Grease Seals For a Lippert 5,200LB Axle Under a 2015 Open Range Light 311FLR 5TH Wheel
  • The Lippert 5,200lb axle under your 2015 Open Range Light 311FLR 5TH Wheel is going to need 2 Seals # GS-2250DL per axle. We do have the Bearing Kit # BK3-300 which will contain the races, bearings, a seal and cotter pin for one hub. This would be good to keep on hand incase you find out any of the bearings and races are worn/damaged when you go to replace the seals. We have the Seal Puller # PTW1219 and Install Kit # PTW83020 which will make removal and installation of the seals and...
    view full answer...

  • Availability of Replacement Brake Assemblies for Lippert 4,400 lb Trailer Axles
  • The 4,400 lb trailer axle is an oddball when it comes to replacement parts but the easy solution is that you'd need 3,500 lb replacement assemblies like the part # AKEBRK-35-SA for a set of left and right hand assemblies that are self adjusting. While the assembly states that it was for a 3,500 lb trailer axle the great thing is that as long as the sizes and bolt pattern match up (like they do) they will work great. The only real difference between brake assembly capacities when the sizes...
    view full answer...